Freight service within the entire EU
We can provide you with quotation for freight of goods purchased from our company within the weight range from 10kg to 24.000kg on request.
Production of cut to size plywood sheets
We can also pre-cut board to your requirements. With our newly purchased Holzman CNC saw (Germany, 2013), we can offer high quality cuts to your specification, delivered directly to where you need them.
DYAS absorption
a plywood containing a special layer of a technical rubber approximately 3 mm thick, which absorbs noise and vibrations. This plywood finds its use especially in a production of vehicles for the public transport - mainly for floorings, walls and decks. Its particular properties contribute to a greater comfort of the passengers.
DYAS absorption
is a health harmless plywood complying with the A (El) Class of formaldehyde escape according to ČSN EN 1084 norm - by the method of gas analysis.
Airborne sound insulation:
Tested according to ČSN EN ISO 140-3 and ČSN EN ISO 717-1.
Applications:
Dyas Absorption finds its use especially in a production of vehicles for the public transport, suitable mainly for floorings, walls and decks in trains, buses, trams and metro, contributing to a greater comfort of the passengers.
Thickness:
16,18,21 mm
(other thicknesses on customers' requests)
Gluing:
Class of gluing 2 (A 100) - ČSN EN 314-2 - can be used in protected exterior areas according to ČSN EN 636
Dimensions:
2 200 x 1 250 mm
2 500 x 1 250 mm
2 500 x 1 500 mm
2 500 x 1 800 mm
(Other dimensions on customers' requests.)
Quality:
BB/BB and BB/CP with dosed surface. Boards may be produced with a phenolic film on the surface. This special modification is suitable in the areas with a higher humidity.
Machining:
Plywood and its edges maching by means of CNC on customers' request.
Moisture:
6% to 12% (at the time of delivery)
Thickness | Number of plies | Approximate volume weight | Areadensity | Bending strength (surface veneer grain orientation) |
Thickness tolerance | |
(kg/m3) | (kg/m2) | lengthwise | crosswise | (mm) | ||
16 | 11x | 790 | 12,64 | 40,0 N/mm2 | 20,0 N/mm2 | +0,6/-0,6 |
18 | 11x | 14,22 | +0,6/-0,6 | |||
21 | 15x | 16,59 | +0,8/-0,8 |
Product Sheet:
Declaration of Performance:
Reference:
DYAS frame
The initial semi product for frame laths is a layered pressed wood made of beech veneers which are 1,5mm thick. Unlike plywood, nearly all veneers have the same grain flow. By this, a high bending strength is achieved in the grain direction. After being processed, plywood boards are cut into frame laths of requested dimensions. Laths are used for the production of bed frames.
DYAS Frame
is a health harmless wood product complying with the A (E1) Class of formaldehyde escape according to ČSN EN 1084 norm - by the method of gas analysis.
Application:
Dyas Frame is a semi product for bed frames production.
Thickness:
20, 25, 30, 35, 40 mm
(other thicknesses on customers' request)
Width:
from 100 up to 1800 mm
Length:
from 300 up to 2500 mm
The surface of the laths can be:
- raw
- impregnated
- wrapped in film
- with chamfered or rounded edges
Gluing:
Class of gluing 1 (IF 20) - ČSN EN 314-2 - can be used in interior applications according to ČSN EN 636
Quality:
PN 10 - DY / 99 - Frame laths
Sanding:
is ordinarily sanded with grain 60, which is a basic sanding along with calibration
Moisture:
6% to 12% (at the time of delivery)
Thickness | Number of plies | Approximate volume weight | Thickness tolerance | Bending strength (surface veneer grain orientation) |
|
(kg/m3) | (mm) | lengthwise | crosswise | ||
18 | 13x | 770 | +0,5/-0,5 | 80,0 N/mm2 tested perpendicularly to the edge |
not defined |
19 | 13x | ||||
20 | 14x/15x | +0,5/-0,7 | |||
21 | 15x | +0,7/-0,7 | |||
22 | I6x | +1.0/-0.7 | |||
25 | I8x | 780 | +1,0/-1,0 | ||
30 | 22x/23x | ||||
40 | 30x/31x | 790 |
Product Sheet:
Declaration of Performance:
Reference:
Certificate CARB II for gluing class 1: